SERVICES & PRICING
HAVE A QUESTION? ABOUT AN ITEM OR SERVICE NOT LISTED BELOW? FEEL FREE TO CONTACT US AT THE PROVIDED NUMBER, IF THERE IS NO ANSWER PLEASE LEAVE A NAME AND NUMBER AND SOMEONE WILL RETURN YOUR CALL AS SOON AS POSSIBLE.
*****NOTICE***** I HAVE REOPENED MY BOOKS FOR A CURRENTLY UNDETERMINED AMOUNT OF TIME. IF YOU ARE INTERESTED IN GETTING ON MY BOOKS PLEASE REACH OUT VIA EMAIL @ INTEGRITY_ARMS@YAHOO.COM. OR YOU CAN REACH OUT THROUGH THIS WEBSITE, OR CAN FIND ME ON FACEBOOK, OR AN AT 1911ADDICTS.COM
BELOW IS A LIST OF OUR CURRENT SERVICES, THE LIST IS NOT BY ANY MEANS AN EXHAUSTIVE LIST AND DOES NOT INCLUDE EVERY POSSIBLE EXPENSE THAT MAY BE INCURRED ON YOUR 1911.. AS DIFFERENT CIRCUMSTANCES MAY REQUIRE A WHOLE DIFFERENT APPROACH TO THE DESIRED END RESULT.. CURRENT FINANCIAL AND INFLATION HAS INCREASED PRICES ACROSS THE BOARD FROM PARTS, TO SHIPPING, TO GAS OBVIOUSLY ETC... WAIT TIMES ARE ALSO BEING CURRENTLY AFFECTED. PLEASE BE PATIENT, I WORK AS QUICKLY AS I CAN BUT, PREFER EFFECIENCY OVER SPEED.
DUE TO RISING COST OF MATERIALS, SERVICES, AND ALL OTHER BUSINESS RELATED EXPENSES THE WEBSITE PRICING IS NO LONGER UP TO DATE. AS OF JUNE 1, 2024 ALL COST WILL NO LONGER BE ITEMIZED. WHILE YOU WILL GET A CUSTOM BUILD SHEET IT WILL NOT INCLUDE INDIVIDUAL COSTS FOR EACH ITEM. I WILL NOW BE WORKING BASED ON AN HOURLY RATE. A FULL NEW BUILD WILL RUN ANYWHERE FROM $5500-$6500 AND COST FOR A FULL BUILT UP COLT WITH PREMIUM PARTS AND SERVICES WILL BE APPROX. $7500
FULL BUILDS: REBUILDS
INTEGRITY ARMS IS PROUD TO ANNOUNCE THE ADDITION OF OUR PREMIER BUILD.. THIS GUN WILL BE BUILT ON YOUR CHOICE OF SLIDE FRAME AND BARREL OR WILL INCLUDE A BASE GUN PROVIDED BY ME IT WILL INCLUDE A 1 TO 1.5" GUARANTEE AT 25 YARDS,
THIS PISTOL WILL BE TAILORED TO FIT YOU INDIVIDUALLY, BY ANSWERING A SMALL GROUP OF QUESTIONS DESIGN DECISIONS WILL BE MADE THAT WILL FIT YOUR SHOOTING STYLE AND PURPOSE AS WELL AS COSMETICALLY FIT YOUR PERSONAL PREFERENCES AS MUCH AS POSSIBLE.
THERE WILL BE NO STONE LEFT UN-TURNED ON THIS BUILD. IT WILL INCLUDE YOUR CHOICE OF FRONT AND REAR SIGHTS, COSMETIC FEATURES TO YOUR SPECS WITHIN REASON AND CAPABLITY. IT WILL INCLUDE 2 TUNED MAGAZINES, TRIGGER OF YOUR CHOOSING, ETC..
THIS GUN IS A TOP TIER BUILD .. EVERY CARE WILL BE TAKEN TO ENSURE PROPER TOLERANCES, SLIDE TO FRAME REFITTING IS INCLUDED IF NEEDED. THIS BUILD JUST ENSURES THAT YOU ARE COVERED. ANY EXTRA OR ADDITIONAL CHARGES THAT MIGHT BE INCURRED WILL BE DISCUSSED AT THE TIME OF ORDER. MOST ANY AND ALL AESTHETIC CUTS ARE INCLUDED, FRONT STRAP CHECKERING, THE WORKS. INQUIRE TODAY AND REACH OUT TO DISCUSS YOUR OPTIONS.
PRICE FOR THIS NEW ADDITION TO OUR BUILDS STARTS AT $6,000 (NO HYBRIDS OR COMPS THOSE WOULD BE PRICED ACCORDING TO DETAILS) MOST ALL PARTS INCLUDED WITHIN REASON.
PRICES ARE SUBJECT TO SOME CHANGES BASED ON MARKET PRICING AND AVAILABILITY, ENGRAVING IS AN EXTRA CHARGE. IF NEEDED OR DESIRED.
ON YOUR SUITABLE SLIDE AND FRAME GUTTING ALL INTERNAL AND EXTERNAL PARTS USING ONLY YOUR SLIDE AND FRAME.. STARTING AT $5,000.00 SLIDE TO FRAME WELD AND RE-FIT INCLUDED. ANY RE-ENGRAVING IS AN UPCHARGE ANY ADDITIONAL WELDING WILL ALSO INCUR AN UPCHARGE.
ON NEW FRAME AND SLIDE: STARTING AT $6.000.00
BASE GUNS CAN BE PROVIDED, AND YOU PAY THE ADDITIONAL COST FOR THE BASE PISTOL. THE PRICE FOR THESE WILL BE BASED ON MARKET VALUE, QUALITY AND OR PRICE ORIGINALLY PAID FOR THE PISTOL TO BE AGREED UPON BEFORE BUILD BEGINS.
CARBON FRAMES AND OR SLIDES USED ARE JEM AND REMSPORT
(ALL PARTS USED IN REBUILD AND FULL GROUND UP BUILDS ARE TOP OF THE LINE, TO INCLUDE BUT NOT LIMITED TO HARRISON DESIGN, WILSON COMBAT, NIGHTHAWK CUSTOM, EGW, EXTREME ENGINEERING, ED BROWN AND OTHERS..) I DO NOT ACCEPT PARTS FROM CLIENTS AS IF THERE IS A PROBLEM WITH SAID PARTS THEN IT IS MUCH MORE TIME CONSUMING AND DIFFICULT TO GET PARTS REPAIRED OR REPLACED AND ALL PARTS DO NOT MESH WELL TOGETHER WITH OTHER PARTS),, YOU WILL NOT BE CHARGED ABOVE AND BEYOND WHAT THE PARTS WOULD COST YOU IF YOU PURCHASED THEM YOURSELF..
MOST SOUGHT AFTER WORK IS ALREADY INCLUDED IN THE BASE PRICE OF THIS BUILD. ADDITIONAL CHARGES FOR EXAMPLE WOULD BE WELDING AND OUTSOURCED WORK AS WELL AS TOP OF THE LINE FINISHES.
FRAME TO SLIDE FIT:
WELD AND RE-CUT FRAME AND TIGHTEN SLIDE TO FRAME FIT $350
PEENING OF FRAME TO TIGHTEN SLIDE TO FRAME FIT MAY SHOW SOME DIS-FORMING AT THE
REAR OF SLIDE AND FRAME FIT, BUT NOT EXTENSIVELY. $150
ACCURAIL INSTALLATION AND FIT ON ALUM OR STEEL FRAMES $300
RELIABILITY PACKAGE I:
RELIABILITY WORK INCLUDES THE FOLLOWING: ENHANCES YOUR PISTOLS RELIABILITY BY WORKING THROUGH, AND CHECKING VARIOUS COMMON PROBLEM AREAS THAT MIGHT CAUSE A1911 TO RUN, EJECT, EXTRACT OR FEED ERRATICALLY WORK INCLUDES POLISHING OF BREACHFACE, POLISHING OF FEED RAMP AND ADJUSTMENT OF ANGLE IF NECESSARY. INSPECTION OF AND MEASUREMENT OF THE VIS :VERTICAL IMPACT SURFACE AND MAKE ADJUSTMENTS, CLEAN UP AS NEEDED. CHECK AND TUNE EXTRACTOR, ALTER TENSION AND CHECK PROPER ANGLE ETC.. CHECK AND TUNE EJECTOR, POLISH THE BARREL CHAMBER RAMP, FINISH REAM AND THROAT BARREL AS NEEDED.. CHECK AND TUNE SLIDE STOP. ALSO INCLUDES DISCO CUT..DE-TENT SPRING AND PINS CHECKED AND POLISHED IF NEEDED.
THIS PACKAGE DOES NOT INCLUDE ANY PARTS.
$200
RELIABILITY PACKAGE II:
THIS PACKAGE INCLUDES EVERYTHING ABOVE AS WELL AS A LIVE ROUND CUT IF DESIRED.. ALSO INCLUDES ALL NEW PARTS.. EXTRACTOR, EJECTOR, FPS,
THESE WILL ALL BE TOOL STEEL PARTS LIKE WILSON COMBAT BP, HARRISON DESIGN ETC.. HD EJECTORS HAVE BEEN SOLD OUT AND ON BACK ORDER SINCE LAST SEPTEMBER. DEPENDING ON AVAILABILITY THE BEST FITTING EJECTOR NEXT TO THE HD WILL BE USED AS NEEDED..
A FULL SEAMLESS AND TIGHT FIT IS NOT ALWAYS ACHEIVABLE DEPENDING ON THE PART. PARTS ARE EQUAL IN QUALITY JUST NOT ALL COMPANIES MAKE FULL FITTING EJECTORS..
$450
ACTION & ACCURACY JOB I:
ACTION WORK IS DESIGNED TO LIGHTEN TRIGGER PULL, LIGHTEN RECOIL, AND JUST INCREASE THE SHOOT-ABILITY OF THE GUN BY REMOVING BURRS FROM FRAME AREAS THAT MAY CAUSE PROBLEMS WITH POOR TRIGGER, GRITTY FEELING EXTREME RECOIL ETC.. WORK INCLUDES, POLISHING OF SEAR SPRING LEAFS, POLISHING OF DIS CONNECTOR, POLISHING OF HAMMER STRUT, HAMMER CUP, POLISHING OF TRIGGER BOW. AND CHECK OVER AND INSTALL NEW SPRINGS IF NEEDED. STONE TRIGGER TRACK, MAKE ADJUSTMENTS FOR PRE AND OVER TRAVEL THIS PARTICULAR SERVICE IS USING YOUR EXISTING PARTS..
$175
ACTION & ACCURACY JOB II:
THIS SERVICE WILL INCLUDE ALL NEW IGNITION CONTROL PARTS, IE.. HAMMER, SEAR, DISCO
ALONG WITH NEW TRIGGER SET TO YOUR DESIRED PULL WEIGHT. THESE PARTS WILL BE TOOL STEEL HIGH QUALITY PARTS PROVIDED BY JOHN HARRISON, WILSON COMBAT OR SOME OTHER REALLY REPUTABLE SUPPLIER.. ALSO INCLUDES A BUNKER ARMS RADIAL BORE BUSHING. SAME WORK AS ABOVE IS INCLUDED. YOUR TRIGGER IS USED UNLESS YOU REQUEST A NEW TRIGGER AS WELL, ALL THE SAME WORK AS ABOVE IS DONE TO YOUR PISTOL. SO THE ADDED COST IS FOR PARTS ONLY.. PRICE QUOTED BELOW INCLUDES SOME TRIGGERS, PRICE MIGHT VARY A SMALL AMOUNT DEPENDING ON PARTS USED. BUT SHOULD NOT ADD MORE THAN ANOTHER $25
$425
CALIBER CONVERSIONS:
INSTALL AND FIT NEW BARREL, TO EXISTING SLIDE. MAY REQUIRE SOME ALTERATION AND WID-ENING OF THE BREACH FACE. NEW GS FIT BARREL BUSHING. NEW EXTRACTOR. OR TUNE CUR-RENT AND EXISTING EXTRACTOR, NEW SPRINGS, AND OR MAGAZINES IF NEEDED. AT LEAST 2 MAGS MUST BE SENT OR PURCHASED. PRIOR TO WORK BEING PERFORMED.. PRICE MAY VARY DEPENDING ON BARREL TYPE.. CALIBER TYPE ETC.. PRICE QUOTED BELOW AS AN EXAMPLE IS A 9MM CONVERSION TO 38 SUPER WITH NEW EXTRACTOR, EJECTOR, BUSHING, SPRINGS ETC..
$600-$800
SUPPLY AND FIT NEW KART, KKM, BARSTO OR OTHER
$450-$500 KART BARRELS ARE A PREFERRED CHOICE AND ARE USUALLY MORE READILY AVAILABLE AND REQUIRE THE LEAST AMOUNT OF WAIT TIME. KKM AND OTHER BARRELS ARE OFTEN SPECIAL ORDER ONLY OR A PREMIUM CHARGING WEBSITE WOULD NEED TO BE USED THIS COULD INCREASE THE BARREL PRICE SUBSTANTIALLY.. (JUST A HEADS UP ON HOW THE INDUS-TRY SOME TIMES IS)
SS BARRELS ADD $50 TO $75 FOR MATERIAL PRICE.. LABOR IS THE SAME
MACHINE FRAME FOR RAMPED BARREL
$175-$225 DEPENDING ON IF I AM ALSO FITTING THE BARREL. A RAMP CUT ALONE IS $225 WITH THE ADDITION OF A BARREL FIT THE RAMP CUT IS $175
EJECTORS:
SUPPLY AND FIT HD EXACT FIT EJECTOR $175
THIS INCLUDES EJECTOR, FITTING AND FLUSHING TO FRAME..
PINNING EJECTOR IF NO HOLE EXISTS $100
EXTRACTORS:
SUPPLY FIT AND TUNE WC OR LIKE EXTRACTORS AND TUNE $125
TRIGGERS:
SUPPLY AND FIT MATCH TRIGGER WC OR LIKE PART USED THIS IS NOT A COMPLETE TRIGGER JOB. $100
SEE ACTION PACKAGE FOR COMPLETE TRIGGER JOB...
SLIDE STOP:
SUPPLY AND FIT SLIDE STOP, TOOL STEEL, HD, WC BP OR LIKE $140
BTGS:
SUPPLY, FIT AND BLEND EGW OR ANY GUNSMITH GRIP SAFETY, INCLUDES HIGH GRIP BLENDING FITTING AND PROPER FUNCTION.. $225-$275 DEPENDING ON PART USED.
MAGWELLS:
FIT AND BLEND ONE PIECE MAGWELL $150 PLUS COST OF PART.
STAN CHEN GEN I AND GEN II MAGWELLS:
SUPPLY AND FIT START AT $500
GRIPS FOR STAN CHEN MAGWELLS CUT ONLY $40 WITH AN INSTALL. $50 FOR EXISTING
GEN 1 MAGWELLS ARE A BIT MORE CHALLENGING AND REQUIRE WELDING A WELDING CHARGE WILL BE ADDED ACCORDINGLY TO A GEN I INSTALLATION.
THUMB SAFETIES:
PRICES MAY VARY DUE TO PART BUT AVERAGE COST TO SUPPLY, FIT AND TUNE SINGLE SIDE
THUMB SAFETY
$175
SAME APPLIED TO AN AMBI SAFETY TO SUPPLY FIT AND TUNE EGW OR EQUAL AVERAGE COST .. $250
MACHINING WORK:
NOVAK SIGHT CUTS REAR $100
FRONT $50.00
MORE INTENSIVES CUTS, BOMARS ETC.. STARTING AT $150
BALL CUTS: $150
FRENCH BORDER $150
FLAT TOP ONLY $125
FLAT TOP AND SERRATIONS, ARROWS ETC.. STARTING AT $175
NON FLAT TOP SLIDE SERRATIONS BALL CUTS ETC.. STARTING AT $150
FLAT TOP WITH MORE INTRICATE CUTS ARE SUBJECT TO SOME ADDITIONAL CHARGES..
SLIDE STOP FLUSHED AND COUNTERSUNK $75
CROWN STANDARD BARRELS $100
CROWN BULL OR SUB-CALIBER BARRELS $125
DISCO CUT $60
LOWER AND FLARE EJECTION PORT WITH LIVE ROUND CUT $150
REAR OF SLIDE SERRATIONS $125
MACHINED UNDERCUT OF TRIGGER GUARD $75
HIGH CUT & CUSTOM BLENDING AROUND TRIGGER GUARD MAG CATCH ETC.. $125
NIGHTHAWK STYLE BLEND THAT REMOVES CRESCENTS $125
DEHORN PACKAGE $150
CARRY BEVEL PACKAGE $150
HIGH POWER CUTS (DEPENDS ON BUSHING SLOT IF THIS CAN BE DONE) $150
HEAVY BEVEL OR STANDARD BEVEL BOTTOM OF SLIDE $125
OTHER SPECIALTY MACHINING (IE) PORTING, OTHER BALL CUTS TO SIDE OF SLIDE ETC.. WILL BE BILLED AT $100 AN HOUR SHOP TIME. IN 1/2 HOUR INCREMENTS.
EZ SLIDE STOP MOD $10
CHECKERING FRONT STRAPS AND MS HOUSINGS:
CHECKERING WITHOUT UNDERCUT. ADD $50 FOR MACHINED UNDERCUT
15 LPI FRONT STRAP $250
20 LPI FRONT STRAP $250
25 LPI FRONT STRAP $250
30 LPI FRONT STRAP $275
SKIP LINE CHECKERING $350
BALL CUT CHECKERING WITH BORDER $350
SERRATIONS OR CHECKERING UNDER AND IN FRONT OF TRIGGER GUARD ( PENDING INSPECTION) STARTING AT $100 EA.
MAINSPRING HOUSING BLANK CHECKERING TO MATCH FRONT STRAP
$150
OTHER AVAILABLE UPON REQUEST BUT, WILL REQUIRE MORE LEAD TIME AND WORK TIME..
PREP AND FINISHES:
FINISH PRICES VARY GREATLY AND CAN BE A LARGE EXPENSE FOR SOME FINISHES. BELOW IS A LIST OF WHAT WE CURRENTLY OFFER AND PRICES WILL BE ADDED TO A FEW OF THEM AS I GET THE PARTICULARS. HIGH POLISH OR BRUSH POLISHED FLATS ADD TO COST. THESE PRICE INCLUDE A COMPLETER PREP OF ALL PARTS TO BE FINISHED AND BEAD BLASTING AS WELL.
BLACK OXIDE BLUING PREP AND FINISH BEAD BLAST ONLY STARTING AT $350
SOME FINISHES DEPEND ON AVAILABILITY.
DLC WHOLE GUN TO INCLUDE BARREL, PINS ETC... THIS INCLUDES ALL PREP PRIOR $475
BEAD BLAST ONLY ON SS INCLUDES PREP. $250
THE BEAD BLASTING PRICE ON A BUILT GUN OR A GUN THAT IS HAVING A SUBSTANTIAL AMOUNT OF WORK DONE TO IT WILL BE DISCOUNTED BY $25-$50
ANY TWO TONE WORK, BRUSH POLISHING, HIGH POLISHING ECT... WILL BE BILLED AT $100 AN HOUR IN 1/2 HOUR INCREMENTS
I STAND BEHIND MY WORK 110%
MY GOAL IS TO BUILD YOU THE PISTOL OF YOUR DREAMS.
I AM A VERY PICKY PERSON AS WELL AS A PERFECTIONIST, AND JUST GOOD ENOUGH IS NOT GOOD ENOUGH FOR ME. SO REST ASSURED I WILL NOT SEND YOUR PISTOL BACK UNLESS I BELIEVE IT IS 100% THE BEST I CAN DO.. I EAT MY OWN MISTAKES IF ANY ARE MADE.. AND YES I AM HUMAN I CAN AND MIGHT MAKE MISTAKES.. THERE IS A $500.00 SHOP MINIMUM.. DOWN PAYMENTS ON BUILDS THAT ARE CANCELED WHERE MORE THAN $500 HAS BEEN PAID WILL BE REFUNDED AT 50% OF THE REMAINING BALANCE RECEIVED OVER THE NON-REFUNDABLE DEPOSIT TO COVER TIME, RETURN SHIPPING AND ANY INCURRED EXPENSE, DOWN TIME OR LOSS OF WORK DUE TO CANCELLATION. IF WORK HAS ALREADY BEGUN ON YOUR BUILD YOU WILL RECEIVE YOUR PISTOL IN THE CURRENT CONDITION IT IS IN, AND NO MONEY WILL BE REFUNDED.. DEPENDING ON HOW FAR INTO THE JOB IT IS YOU WILL RECEIVE ALL YOUR ORIGINAL PARTS BUT, MAY NOT RECEIVE ALL THE NEW PARTS THAT WERE ORIGINALLY INCLUDED IN THE BILL...
WORK OR START TIMES ARE ESTIMATES, AND OFTEN TIMES WE AS GUNSMITHS WILL BE AT THE MERCY OF SOMEONE ELSE’S TIME LINE FOR PARTS, ADDITIONAL OUT SOURCED WORK ETC. I WILL CALL YOU WHEN YOUR BUILD OR WORK IS WITHIN ONE MONTH OF THE PROJECTED START TIME...OR HAS ONE OTHER JOB IN FRONT, YOU HAVE UNTIL THIS TIME TO CHANGE UP ANYTHING. ANY CHANGES DURING THE COURSE OF THE AGREED TO WORK WILL INCUR AN EXTRA $100 CHARGE.
I AM VERY EASY TO TALK TO, AND VERY EASY TO WORK WITH, IF GIVEN THE OPPORTUNITY TO DO SO.. I UNDERSTAND THIS IS A BIG UNDERTAKING FOR BOTH YOU AND I AND I BELIEVE GOOD COMMUNICATION HELPS TO CREATE A SATISFYING EXPERIENCE FOR US BOTH, IF YOU HAVE ANY QUESTIONS OR CONCERNS MY LINE IS ALWAYS OPEN FOR EXISTING AND POTENTIAL CLIENTS..
I CAN AND WILL DISCOUNT FINISHES AND CERTAIN OTHER WORK DEPENDING ON THE AMOUNT OR WORK YOU ARE HAVING DONE..
I PREFER TO PROCURE MY OWN PARTS, AS THE TIME TO EXCHANGE, CHANGE OR REORDER THE WRONG PART REALLY COSTS A LOT MORE THAN IT’S WORTH, I RESERVE THE RIGHT TO USE YOUR PARTS OR NOT DEPENDING ON THE BUILD AND THE QUALITY OF THE PARTS AND IF THEY ARE THE RIGHT PARTS FOR THE JOB. IN PROCURING MY OWN PARTS I NOT ONLY ESTABLISH BETTER WORKING RELATIONSHIP WITH SUPPLIERS, I ALSO CAN GET SOME DISCOUNTS ON SOME OF YOUR PARTS... NOT ALWAYS, BUT SOMETIMES. I USE ONLY QUALITY FORGED MACHINED PARTS.
IF YOU HAVE ANY FURTHER QUESTIONS OR DO NOT UNDERSTAND OR JUST WANT TO DISCUSS SOMETHING FEEL FREE TO CALL ME, I AM NEARLY ALWAYS HERE UNLESS I AM SOMEWHERE ELSE HAVING WORK DONE THAT DAY..
ONCE A BUILD HAS BEEN AGREED TO AND I BEGIN YOUR BUILD I TRY TO BE VERY COMMUNICATIVE, I WILL CALL YOU AND ASK QUESTIONS ABOUT SOME OF YOUR SHOOTING HABITS, HOW YOU HOLD THE PISTOL, WHAT PARTICULAR PARTS OF THE PISTOL ARE MOST IMPORTANT TO YOU? (I.E.) SIGHTS, TRIGGERS, CHECKERING, ACCURACY, RELIABILITY ETC.. I WANT TO TRY AND PUT MYSELF IN YOUR SHOES WHEN I BUILD YOUR PISTOL SO THAT THE PISTOL IS PERSONALIZED TO YOUR SPECIFIC WANTS AND NEEDS..
I MAY AT TIMES INSIST ON A CERTAIN PART ETC,, THIS IS BECAUSE I SEE WHAT WORKS AND WHAT DOESN’T I HAVE EVERY PART IMAGINABLE COME ACROSS MY DESK, MANY OF WHICH ARE SITTING IN A BOX NEVER TO BE SEEN OR HEARD FROM AGAIN LOL...
THANK YOU FOR TAKING THE TIME TO LOOK OVER THIS PRICE SHEET PLEASE CALL TO DISCUSS DETAILS WE CAN COVER A TON MORE GROUND IN A SHORTER TIME AND WE CAN ALSO GET TO KNOW EACH OTHER A LITTLE BIT BEFORE STARTING ON YOUR GUN...
CALL ME AT 419-305-4121
DISCLAIMER: ( IF YOU ASK ME TO COPY ANOTHER SMITHS SIGNATURE DETAILS ON A PISTOL 1 OF 2 THINGS WILL HAPPEN.)
1.) I WILL REFUSE DUE TO THE FACT THAT I AM NOT THAT PERSON, AND HAVE MY OWN STYLE LIKE IT OR NOT.. AND OR I ALREADY KNOW THEY WILL NOT APPROVE. THIS ISN'T ABOUT BEING ABLE TO DO IT, IT'S ABOUT MUTUAL RESPECT THAT WE TRY AND MAINTAIN FOR EACH OTHER IN THE INDUSTRY..
2.) I WILL APPROACH THE SMITH AND ASK THEIR PERMISSION TO DO SAID WORK, OR ASK THEM IF THEY CAN FIT IT INTO THEIR ALREADY BUSY SCHEDULE. EITHER WAY IT MAY OR MAYNOT HAPPEN. TO BE HONEST NOT ONE SMITH OUT THERE LIKES TO BE ASKED TO COPY SOMEONE ELSES WORK, WE ALL HAVE OUR OWN STYLE IN HOPES THAT YOU CHOOSE US BECAUSE YOU LIKE OUR STYLE OF BUILDS. THAT'S NOT TO SAY WE WON'T BUILD RETRO, CLASSIC, OR OUR INTERPRETATION OF MODERN, IT JUST MEANS MOST OF US FEEL IT'S DISRESPECTFUL TO ASK FOR ANOTHER SMITHS WORK PERIOD... I JUST RESERVE AND DESERVE THE RIGHT TO JUST SAY NO.
MY PROJECTED SCHEDULE AS OF 7/15/2022 MY BOOKS ARE CURRENTLY CLOSED UNTIL FURTHER NOTICE. IF YOU ARE A REPEAT CLIENT YOU MAY CALL AT ANY TIME FOR AN UPDATE ON THIS SITUATION. I SOMETIMES CAN WORK ON SMALLER PROJECTS OR FINISHING PROJECTS OTHER TIMES I CANNOT.. BUT, I WILL NOT FOR ANY REASON BUMP ANOTHER CLIENTS WORK BACK IN ORDER TO DO YOUR WORK, SO PLEASE DON’T ASK.... WORK IS PERFORMED ON A FIRST COME FIRST SERVE BASIS ONLY! IN PROGRESS CHANGES WILL ADD $200 TO FINAL INVOICE FOR EACH ADDED ITEM MINIMUM AS ANY CHANGES WILL REQUIRE AT LEAST ONE EXTRA HOUR OF TIME TO EITHER PREP, ORDER ADDITIONAL PARTS, OR RESTOCK ALREADY ORDERED PARTS.. CHANGES MADE WITHIN 60 DAYS PRIOR TO PROJECTED BUILD DATE WILL BE ACCOMMODATED.
PLEASE CONTACT ME WITH ANY QUESTIONS I DO HAVE A SECONDARY LIST THAT YOU CAN BE ADDED TO IN ORDER TO GET ON THE BOOKS WHEN THEY OPEN, THOSE WILL GO IN THE ORDER IN WHICH THEY WERE RECEIVED UNTIL MY BOOKS ARE AGAIN FULL. I DO NOT CURRENTLY BOOK OUT PAST 2 YEARS.. THANK YOU.
SPECIAL PROMOTIONS OR DISCOUNTS
FROM TIME TO TIME INTEGRITY ARMS MAY OFFER SPECIAL PRICING OR SPECIAL SERVICES CHECK BACK FROM TIME TO TIME TO SEE IF THERE ARE ANY SPECIAL PROMOTIONS...
PAYMENTS AND SECURING YOUR SPOT..
AT THIS TIME I AM UNABLE TO ACCEPT CREDIT CARDS. CURRENT FORMS OF PAYMENT INCLUDE CASH, MONEY ORDER, SOME CASH APPLICATIONS, USPS CHECK, BANK CHECK OR PERSONAL CHECK MADE OUT TO STEVE OWENS. A NON-REFUNDABLE DOWN PAYMENT OF $500.00 IS REQUIRED TO SECURE A SPOT ON THE CURRENT SCHEDULE. AFTER WORK BEGINS ON YOUR PROJECT ANOTHER SMALL INSTALLMENT WOULD BE HELPFUL BUT IS CURRENTLY NOT REQUIRED. FINAL PAYMENT IS DUE PRIOR TO FINAL FINISH UNLESS OTHERWISE AGREED TO
This is your FAQ Section Footer. It's a great place to invite people to contact you if they can’t find the answer to their question in the Q&As you provided.